Continental Contitech 20450178 Thermoplastic Hose 1.25in

Product Description

The CONTINENTAL CONTITECH 20450178 is a thermoplastic round hose designed for fluid transfer applications requiring a durable, flexible low-pressure line. With a 1.25-inch inside diameter and a 1.53-inch outside diameter, this hose handles a working pressure of 50 psi and a burst pressure of 150 psi. The green and black thermoplastic construction provides resistance across a wide temperature range of -20 degrees F to 180 degrees F. It is sold in 1-foot increments with a minimum cut length of 25 feet from a 100-foot total spool, making it well-suited for job-specific cuts in the field or shop.

This hose is appropriate for general-purpose fluid conveyance in light industrial, irrigation, agricultural, and trade service environments. The thermoplastic construction makes it compatible with a range of water-based transfer applications. A vacuum rating of 29.0 inches Hg adds versatility for low-pressure suction service. Plumbers, irrigation technicians, and general contractors commonly specify cut-to-length hose of this type when routing flexible lines through equipment or connecting fixtures in tight spaces.

Key Features

• 1.25-inch inside diameter and 1.53-inch outside diameter for a consistent flow path
• 50 psi working pressure with a 150 psi burst pressure rating
• 29.0 vacuum rating supports light suction-side applications
• Operating temperature range of -20 degrees F to 180 degrees F
• Green and black thermoplastic construction for easy visual identification
• Sold cut-to-length in 1-foot increments with a 25-foot minimum order quantity

Compatibility

Designed as a general-purpose thermoplastic cut-to-length hose suitable for low-pressure fluid transfer in light industrial, agricultural, and trade service installations.

Installation Notes

Cut to the required length using a sharp utility knife or hose cutter for a clean, square end before fitting connections. Ensure the system is depressurized and drained before removing or replacing any hose section. Verify that fittings and clamps are rated for at least 50 psi and are compatible with thermoplastic hose material. Adhere to applicable local plumbing codes when installing in potable or process water systems.