Continental Contitech 20448193 Transfer Hose 2 in Id

Product Description

The CONTINENTAL CONTITECH 20448193 is a urethane dry material handling transfer hose designed for demanding industrial and trade applications. With a 2-inch inner diameter and 2.46-inch outer diameter, it handles dry bulk material transfer at working pressures up to 40 psi and vacuum ratings up to 29 inches Hg. The urethane construction delivers flexibility and abrasion resistance across a wide temperature range of -40 degrees F to 158 degrees F. This hose is sold by the foot in 20-foot minimum cut lengths from a 100-foot coil, making it suitable for custom-length installations in plant, shop, or field environments.

This hose is suited for dry material transfer tasks in industrial facilities, manufacturing environments, and trade service applications where abrasive or granular materials must be conveyed through flexible ducting. The 2.5-inch minimum bend radius allows routing in tighter installations. The black urethane tube and cover construction is well matched to pneumatic conveying systems, dust collection, and vacuum transfer setups. It is typically installed by millwrights, industrial mechanics, or experienced service technicians working on material handling equipment.

Key Features

• 2-inch ID and 2.46-inch OD for precise fitment in standard transfer line connections
• 40 psi maximum working pressure for pressurized dry material conveying
• 29 inches Hg vacuum rating supports vacuum-side transfer applications
• Urethane construction provides abrasion resistance for dry bulk and granular materials
• Temperature range of -40 degrees F to 158 degrees F for broad environmental compatibility
• Minimum bend radius of 2.5 inches enables routing in confined spaces

Compatibility

Designed as an OEM-style replacement or new-installation hose for dry material handling and pneumatic transfer systems requiring a 2-inch ID flexible urethane hose at up to 40 psi working pressure.

Installation Notes

This hose is typically installed by industrial mechanics or qualified service technicians. Depressurize and lock out the system before cutting or connecting the hose. Measure and cut to required length from the coil using a sharp blade for clean, square ends that seal properly against fittings. Verify that all clamps or coupling hardware are rated for the working pressure of the system before returning it to service.