Continental Contitech 20129504 Air Hose 1/2 in 300 Psi Pvc

Product Description

The CONTINENTAL CONTITECH 20129504 is a multipurpose PVC air hose sold in cut-to-length increments, priced per foot with a 25-foot minimum cut. It carries a 300 psi working pressure rating and handles temperatures from -10 degrees F to 158 degrees F, making it suitable for year-round shop and jobsite use. The 0.50-inch inside diameter and 0.78-inch outside diameter support solid airflow for pneumatic tools and general compressed-air service. The yellow PVC jacket provides visibility on busy work surfaces. Technicians in HVAC, plumbing, electrical, and general mechanical trades use this hose for temporary and semi-permanent air supply runs.

This hose is suited for light to medium industrial and commercial applications where a flexible, cut-to-length air supply line is needed. Typical installations include compressor feed lines, pneumatic tool drops in workshops, and service van setups. Because it is sold off a 750-foot master coil in 25-foot minimum increments, contractors can purchase exactly the footage required for a job without taking excess material. No end connections are pre-installed, allowing installers to terminate with the fittings that match their existing pneumatic system.

Key Features

• 300 psi working pressure for standard compressed-air service
• Temperature range: -10 degrees F to 158 degrees F
• 1/2 inch inside diameter supports pneumatic tool airflow requirements
• 0.78 inch outside diameter, flexible PVC construction
• High-visibility yellow jacket for jobsite safety
• Cut-to-length format with 25-foot minimum and 750-foot total coil available

Compatibility

Designed as a cut-to-length replacement or new-installation air hose for standard 1/2 inch ID pneumatic systems requiring a no-end-connection PVC hose rated to 300 psi.

Installation Notes

Installation should be performed by a qualified technician familiar with compressed-air systems. Depressurize and lock out the air supply before cutting or connecting hose sections. Use fittings and clamps rated at or above the 300 psi working pressure of this hose. Verify that all end connections are fully seated and leak-tested before returning the system to service.