Continental Contitech 20129501 Air Hose 1/4 in 300 Psi Pvc

Product Description

The CONTINENTAL CONTITECH 20129501 is a multipurpose PVC air hose sold in cut-to-length increments from bulk coil stock. It carries a 300 psi working pressure rating and handles a temperature range of -10 degrees F to 158 degrees F, making it suitable for year-round shop and field use. The 1/4 inch inside diameter (0.45 inch outside diameter) suits standard air tool fittings and compressor outlets. HVAC technicians, plumbers, electricians, and general contractors use this hose for pneumatic tool supply lines, blow-down tasks, and temporary air distribution on job sites. It is priced and cut in 1-foot increments with a 25-foot minimum cut length.

This hose is appropriate for light to moderate-duty compressed air service in both residential and commercial settings. The yellow PVC jacket is easy to spot on a job site and resists common shop fluids. No end connections are included; fittings are field-installed by the technician based on the application. The 750-foot total coil length allows high-volume cutting to meet larger project needs when ordering in quantity.

Key Features

• 300 psi working pressure for reliable pneumatic tool and air supply service
• Temperature range of -10 degrees F to 158 degrees F for year-round use
• 1/4 inch ID with 0.45 inch OD for compatibility with standard air fittings
• Yellow PVC construction provides visibility and resistance to common shop fluids
• Cut-to-length format with 1-foot increments and 25-foot minimum cut length
• Bulk coil of 750 feet reduces waste and supports high-volume project needs

Compatibility

Designed for general-purpose compressed air service lines where a 1/4 inch ID PVC hose rated at 300 psi is required. No end connections are included; field-install appropriate fittings for the specific pneumatic tool or air outlet in use.

Installation Notes

Installation and cutting should be performed by a qualified technician familiar with compressed air systems. Depressurize the air supply completely before cutting, splicing, or attaching fittings to the hose. Use hose-rated clamps and fittings appropriate for the 300 psi working pressure of this line. Do not exceed the rated working pressure or temperature limits marked for this hose.