Continental Contitech 20026256 Oil Resistant Air Hose

Product Description

The CONTINENTAL CONTITECH 20026256 is an oil resistant air hose constructed from Buna-N nitrile rubber, designed for compressed air service in environments where petroleum-based oils and fluids are present. The hose has a 3/8 inch inside diameter and a 0.73 inch outside diameter, with a working pressure rating of 500 psi. It handles a temperature range of -20 degrees F to 190 degrees F, making it suitable for both cold-weather outdoor work and heated shop environments. HVAC technicians, plumbers, pipefitters, and general mechanical contractors install this hose in production lines, service shops, and job-site pneumatic systems. It is sold cut-to-length from a 500-foot coil in 1-foot increments, with a 25-foot minimum cut length per order.

This hose is suited for residential and commercial shop air systems, pneumatic tool lines, and industrial compressed air distribution where oil mist or oil-lubricated compressors are in use. Its nitrile rubber construction resists degradation from compressor lubricants, making it the correct choice over standard EPDM or PVC air hose when oil contamination is a factor. The yellow jacket aids visibility on busy job sites and in shop environments. Contractors and service technicians who need a specific run length rather than a fixed-assembly hose will find the cut-to-length format practical for custom installations and hose reel setups.

Key Features

• Buna-N nitrile rubber construction resists petroleum-based oils and compressor lubricants
• 500 psi working pressure rated for demanding compressed air service
• Temperature range of -20 degrees F to 190 degrees F for year-round use
• 3/8 inch ID with 0.73 inch OD — standard sizing for pneumatic tool and air line work
• Yellow jacket improves job-site visibility
• Sold cut-to-length in 1-foot increments from a 500-foot coil, 25-foot minimum per cut

Compatibility

Designed as an OEM-style cut-to-length replacement or new-installation air hose for compressed air systems using oil-lubricated compressors in residential, commercial, and light industrial applications. No end connections are included; fittings must be field-installed to match the specific system.

Installation Notes

Installation is typically performed by licensed mechanical contractors, HVAC technicians, or qualified plumbers working on compressed air distribution systems. De-pressurize and lock out the air supply before cutting or connecting hose sections. Use crimped or barbed fittings rated at or above the 500 psi working pressure of the hose. Follow OSHA and applicable local codes for compressed air system installation, including proper hose restraint and whip-check requirements where applicable.