Continental Contitech 20026037 Push-on Air Hose 0.75 in Id

Product Description

The CONTINENTAL CONTITECH 20026037 is a push-on air hose designed for compressed air service in industrial and trade environments. Built from black synthetic rubber, it carries a 250 psi working pressure rating and performs across a temperature range of -20 degrees F to 190 degrees F. The 0.75 inch inside diameter and 1.08 inch outside diameter suit standard push-on fittings without clamps or crimps. This hose is sold cut-to-length from a 500-foot coil, priced in 1-foot increments, with a 25-foot minimum cut length. Installation is handled by HVAC techs, plumbers, and industrial mechanics running shop air, pneumatic tools, or equipment supply lines.

This hose is suited for light to medium compressed air applications in shops, mechanical rooms, and equipment bays. The push-on construction means no clamp tools are required at the fitting connection, which speeds assembly on pneumatic circuits. The synthetic rubber construction resists oil mist and moderate heat commonly found near compressors and HVAC equipment. It is appropriate for both new installations and replacement runs where a flexible, cut-to-length air supply line is needed.

Key Features

• Push-on design accepts standard barb fittings without clamps or crimp tooling
• 250 psi working pressure suits most shop and trade compressed air applications
• Operating range of -20 degrees F to 190 degrees F for use near heat sources
• Synthetic rubber construction resists oil mist and moderate abrasion
• Cut-to-length availability in 1-foot increments reduces waste on custom runs
• 0.75 inch ID with 1.08 inch OD for consistent fit on standard push-on fittings

Compatibility

Designed as a cut-to-length push-on air hose replacement or new-installation supply suitable for standard 0.75 inch push-on barb fittings used in compressed air systems.

Installation Notes

De-energize and bleed down the compressed air system before cutting or connecting this hose. Push-on hose relies on a proper barb-seat engagement for a leak-free connection — verify the fitting is fully seated before returning the system to pressure. Follow applicable OSHA and local compressed air safety codes when routing and securing air lines. Inspect the cut end for clean, square cuts to ensure a full seal on the barb.