Continental Contitech 20022745 Push-on Air Hose 5/8 in Id

Product Description

The CONTINENTAL CONTITECH 20022745 is a push-on air hose designed for compressed-air distribution in industrial, shop, and mechanical service environments. Constructed from synthetic rubber with a gray outer jacket, this hose handles a working pressure of 400 psi and an operating temperature range of -40 to 200 degrees F. The 5/8 inch inside diameter supports high-volume airflow demands typical in production facilities, service bays, and equipment rooms. It is sold by the linear foot in 1-foot increments, with a 25-foot minimum cut length, making it suitable for custom-length runs. Licensed HVAC technicians, plumbers, and general mechanics are the primary installers of cut-to-length hose in fixed or semi-permanent air supply applications.

This hose is well suited for permanent and semi-permanent compressed-air plumbing in commercial shops, manufacturing floors, and mechanical rooms where a push-on fitting connection style eliminates the need for clamps or crimped ends. The cut-to-length format allows installers to size runs precisely for equipment drops, tool stations, or manifold feeds. The wide temperature tolerance makes it viable in both climate-controlled interiors and unconditioned spaces that see seasonal temperature swings. The 500-foot total coil length supports larger installations with fewer splices.

Key Features

• 400 psi working pressure for demanding compressed-air service
• 5/8 inch inside diameter and 0.93 inch outside diameter for high-flow capacity
• Operating range of -40 to 200 degrees F for broad environmental compatibility
• Synthetic rubber construction resists wear, oil mist, and weathering
• Push-on end connection style — no clamps or crimp fittings required
• Cut-to-length availability in 1-foot increments with a 25-foot minimum order

Compatibility

Designed for use with standard push-on air fittings compatible with 5/8 inch ID hose in fixed compressed-air distribution systems. Verify fitting manufacturer specifications to confirm push-on compatibility before installation.

Installation Notes

Installation of compressed-air hose should be performed by a qualified mechanic or pipefitter familiar with shop air system requirements. Depressurize and lock out the air supply before cutting, routing, or connecting any hose segment. Ensure all push-on fittings are fully seated and rated for the system working pressure before restoring air supply. Follow applicable OSHA and facility safety codes for compressed-air system construction and maintenance.