Continental Contitech 20013094 Pvc Duct Hose 2 in 30 Psi

Product Description

The CONTINENTAL CONTITECH 20013094 is a flexible PVC duct hose engineered for low-pressure ventilation and vacuum-transfer applications in trade and industrial environments. With a 2-inch inside diameter and a 2.35-inch outside diameter, it handles airborne pollutants, dust, fumes, and odors at working pressures up to 30 psi and vacuum ratings up to 29 Hg. The operating temperature range of 15 degrees F to 150 degrees F makes it suitable for both cold-environment dust collection and warm-air exhaust routing. HVAC technicians, industrial hygienists, and mechanical contractors install this hose where flexible, lightweight duct routing is required.

This hose is commonly used in dust collection systems, portable fume extractors, air scrubbers, and general ventilation setups in residential and light commercial applications. It is sold in 1-foot increments with a 25-foot minimum cut length from a 100-foot coil, making it practical for job-site cuts to exact required lengths. Typical installations include exhaust runs from portable HEPA units, tool dust ports, and temporary ventilation ducts where rigid duct is not practical.

Key Features

• 2-inch ID with 2.35-inch OD for standard duct fittings and collars
• 29 Hg vacuum rating supports dust collection and negative-pressure ventilation
• 30 psi maximum working pressure for low-pressure forced-air transfer
• Operating range of 15 degrees F to 150 degrees F suits most field conditions
• 5.5-inch minimum bend radius allows tight routing in confined mechanical spaces
• White PVC construction resists moisture and is easy to inspect for blockage or damage

Compatibility

Designed for use with airborne pollutant, dust, fume, and odor control systems. Suitable as a flexible duct connector in portable and semi-permanent ventilation assemblies where PVC duct hose of 2-inch ID is specified.

Installation Notes

Installation is typically performed by HVAC technicians or mechanical contractors. Secure each end with an appropriately sized hose clamp or duct collar before system pressurization. Do not exceed the rated working pressure of 30 psi or the vacuum rating of 29 Hg. Verify the installation environment stays within the 15 degrees F to 150 degrees F operating range to prevent hose stiffening, kinking, or deformation.