Coilhose Pneumatics PTM0806-250TC Polyurethane Tube 250 Ft

Product Description

The COILHOSE PNEUMATICS PTM0806-250TC is a clear polyurethane pneumatic tube designed for compressed air and fluid transfer applications in industrial and production environments. With a 3/8 inch inside diameter and a 1/2 inch outside diameter, this tube maintains consistent airflow and pressure across pneumatic circuits. The wall thickness measures 1/16 inch, and the tube is rated for a maximum working pressure of 73 psi. A 90 Shore hardness rating indicates the material resists kinking and abrasion under normal service conditions. This tube is sold by the foot in 25-foot minimum cut lengths from a 250-foot total coil.

This polyurethane tube is suited for light industrial pneumatic lines, automation equipment, and push-to-connect fittings in manufacturing and assembly environments. Its clear construction allows visual monitoring of airflow and fluid movement without cutting into the line. The 250-foot coil length makes it practical for shops and field crews that need to cut custom runs on-site. It is commonly installed by industrial maintenance technicians, pneumatic systems specialists, and mechanical contractors working on compressed air distribution or control line applications.

Key Features

• Clear polyurethane construction allows visual inspection of flow without disconnecting the line
• 3/8 inch ID and 1/2 inch OD sizing fits standard push-to-connect and barb fittings for that tube size
• Rated to 73 psi maximum working pressure for light industrial pneumatic service
• 90 Shore hardness provides kink and abrasion resistance in routed installations
• 1/16 inch wall thickness maintains consistent tube geometry under pressure
• 250-foot coil allows on-site custom cutting with a 25-foot minimum cut length per order increment

Compatibility

Designed as a standard-dimension polyurethane pneumatic tube compatible with push-to-connect fittings and barb fittings sized for 3/8 inch ID by 1/2 inch OD tubing in compressed air and pneumatic control applications.

Installation Notes

Depressurize and lock out the compressed air supply before removing or splicing into any existing pneumatic line. Cut tube ends square with a dedicated tube cutter or sharp blade to ensure a proper seal at push-to-connect fittings. Avoid routing the tube across sharp edges or in areas where it contacts hot surfaces, as sustained heat exposure can reduce working pressure ratings. Installation should comply with applicable compressed air system codes and the fitting manufacturer's published insertion depth requirements.