Coilhose Pneumatics PTM0806-250K Polyurethane Tube 250 Ft

Product Description

The COILHOSE PNEUMATICS PTM0806-250K is a black polyurethane pneumatic tube designed for compressed air and fluid transfer applications in industrial and trade environments. It measures 3/8 inch inside diameter by 1/2 inch outside diameter with a 1/16 inch wall thickness. The tube carries a maximum working pressure of 73 psi and a Shore hardness rating of 90, indicating a firm yet flexible construction suited to demanding pneumatic lines. Sold from a 250-foot coil in 1-foot increments with a 25-foot minimum cut length, it gives shops and field techs the flexibility to cut exactly what a job requires without waste.

This tube is appropriate for pneumatic tool lines, air-powered equipment, and general compressed air distribution in residential, commercial, and light industrial settings. Its polyurethane construction resists abrasion and maintains flexibility across a broad range of working conditions. Plumbers, HVAC technicians, industrial maintenance staff, and pneumatic system installers commonly use tubing of this type when routing compressed air to tools, actuators, or control devices. The black color provides UV resistance suitable for both indoor and sheltered outdoor runs.

Key Features

• 3/8 inch ID x 1/2 inch OD with 1/16 inch wall thickness for consistent flow capacity
• 73 psi maximum working pressure rated for standard pneumatic tool and equipment lines
• Shore hardness of 90 for firm, kink-resistant performance under routing stress
• 250-foot total coil length sold in 1-foot increments with 25-foot minimum cut
• Black polyurethane construction offers abrasion resistance and UV tolerance

Compatibility

Designed as a standard-dimension polyurethane pneumatic tube suitable for push-to-connect fittings, barb fittings, and compression fittings sized for 3/8 inch ID by 1/2 inch OD tubing in compressed air distribution systems.

Installation Notes

Installation is typically performed by industrial mechanics, HVAC technicians, or qualified pneumatic system installers. Depressurize and lock out the compressed air supply before cutting into any existing pneumatic line. Use a clean, square tube cut with a dedicated tube cutter to ensure leak-free fitting connections. Verify that all fittings and connectors are rated at or above the system operating pressure before placing the line into service.