Coilhose Pneumatics PTM0604-500TC Polyurethane Tube 500 Ft

Product Description

The COILHOSE PNEUMATICS PTM0604-500TC is a clear polyurethane pneumatic tube supplied in a 500-foot coil, sold in 1-foot increments with a 25-foot minimum cut length. It carries a maximum working pressure of 126 psi and features a 0.25-inch inside diameter, 0.375-inch outside diameter, and a 0.0625-inch wall thickness. The polyurethane construction delivers flexibility across a wide temperature range while resisting abrasion, kinking, and common industrial fluids. This tubing is a standard choice for compressed air distribution, pneumatic tool feed lines, and automation plumbing in shop and industrial environments.

This tube is suited for light to medium-duty pneumatic systems in both residential shop settings and commercial or industrial facilities. Typical applications include routing compressed air from distribution manifolds to pneumatic tools, actuators, and fittings. The clear color allows technicians to quickly verify flow and check for contamination or blockages without disconnecting the line. The 500-foot coil format reduces waste on larger installations where custom run lengths are required.

Key Features

• Clear polyurethane construction for visual flow inspection
• 126 psi maximum working pressure for standard compressed air service
• 0.25-inch ID and 0.375-inch OD with a 0.0625-inch wall thickness
• Sold in 1-foot increments from a 500-foot coil, 25-foot minimum cut length
• 90 Shore hardness rating for durability and kink resistance
• Abrasion-resistant material suited for routed or dragged installations

Compatibility

Designed as a general-purpose pneumatic tubing replacement compatible with standard push-to-connect and compression fittings sized for 0.375-inch OD tubing in compressed air systems.

Installation Notes

Installation is typically performed by pneumatic or mechanical technicians following applicable shop air system guidelines. Depressurize and lock out the compressed air supply before cutting or connecting tubing. Use a clean, square cut to ensure a proper seal with push-to-connect or compression fittings. Verify all fittings are rated for at least 126 psi before placing the system back in service.