Coilhose Pneumatics PTL0503-500TC Polyurethane Tube 500 Ft

Product Description

The COILHOSE PNEUMATICS PTL0503-500TC is a clear polyurethane pneumatic tubing sold in a 500-foot coil, priced and cut in 1-foot increments with a 25-foot minimum cut length. It features a 3/16 inch inner diameter, 5/16 inch outer diameter, and 1/16 inch wall thickness. Rated to a maximum working pressure of 93 psi, this tubing handles demanding pneumatic line applications where flexibility and abrasion resistance are required. The 85 Shore hardness rating indicates a firm yet flexible profile suited to routing through tight spaces. Installers in industrial, workshop, and mechanical service environments commonly use this tubing for compressed air distribution and pneumatic control lines.

This polyurethane tube is appropriate for low-pressure pneumatic plumbing in manufacturing facilities, automotive service shops, and industrial maintenance applications. Its clear color allows quick visual inspection of airflow and contaminants. The 500-foot coil format suits contractors and shops that cut custom lengths for multiple drops or circuits from a single reel. The 25-foot minimum cut length applies when ordering by the foot.

Key Features

• Clear polyurethane construction allows visual inspection of the air line
• Rated to 93 psi maximum working pressure
• 3/16 inch ID and 5/16 inch OD with a 1/16 inch wall thickness
• 85 Shore hardness provides firm, flexible routing in tight spaces
• 500-foot coil format with 1-foot increment pricing and 25-foot minimum cut length

Compatibility

Designed as a standard-dimension polyurethane pneumatic tube suitable for use with push-to-connect and barbed fittings sized for 3/16 inch ID or 5/16 inch OD tubing in compressed air and pneumatic control systems.

Installation Notes

Depressurize and lock out the compressed air system completely before cutting or connecting tubing. Use a clean, square cut with a dedicated tube cutter to ensure a proper seal at push-to-connect fittings. Avoid routing tubing near sharp edges, heat sources, or oils incompatible with polyurethane. This type of installation is typically performed by industrial maintenance technicians or plumbers working under applicable facility safety procedures.