Coilhose Pneumatics PTL0402-1000B Polyurethane Tube 1/4in Od

Product Description

The COILHOSE PNEUMATICS PTL0402-1000B is a polyurethane pneumatic tubing sold in a 1,000-foot coil and priced in 1-foot increments with a 25-foot minimum cut length. It features a 1/8-inch inside diameter and a 1/4-inch outside diameter with a 1/16-inch wall thickness, rated to a maximum working pressure of 126 psi. The tubing is blue in color and constructed from polyurethane with a hardness rating of 85 Shore A. It is suited for use in compressed air distribution, pneumatic control lines, and instrument air applications. HVAC technicians, industrial maintenance technicians, and pneumatic system installers are the typical end users.

This tubing is used in light to medium-duty pneumatic systems where flexibility, abrasion resistance, and consistent bore diameter are required. Common applications include connecting pneumatic actuators, solenoid valves, flow controls, and fittings in both residential and commercial equipment. The 1/4-inch OD size is one of the most widely used sizes in push-to-connect pneumatic fittings. The blue color aids in line identification in multi-tube installations. The 1,000-foot coil format is practical for shops and service fleets that cut tubing to length on demand.

Key Features

• 1/8-inch ID and 1/4-inch OD with a 1/16-inch wall thickness for consistent dimensional tolerances
• Rated to 126 psi maximum working pressure
• Polyurethane construction with 85 Shore A hardness for flexibility and durability
• Blue color for easy identification in multi-line pneumatic systems
• Sold in 1-foot increments from a 1,000-foot coil with a 25-foot minimum cut length

Compatibility

Designed for use with standard 1/4-inch OD push-to-connect and compression-style pneumatic fittings commonly found in compressed air and instrumentation systems.

Installation Notes

Installation is typically performed by HVAC technicians, pneumatic system technicians, or industrial maintenance personnel. Depressurize and lockout the air supply before cutting or connecting tubing. Use a clean, straight tubing cut to ensure a proper seal with push-to-connect fittings. Follow the equipment manufacturer guidelines and applicable codes for pneumatic line installation and pressure ratings.