Coilhose Pneumatics PT0909-200TC Polyurethane Tube 200 Ft

Product Description

The COILHOSE PNEUMATICS PT0909-200TC is a clear polyurethane pneumatic tube designed for use in compressed air and fluid transfer applications. With a 3/8 inch inside diameter, 9/16 inch outside diameter, and 3/32 inch wall thickness, this tube delivers reliable performance in tight routing situations. It handles a maximum working pressure of 115 psi and operates across a temperature range of -40 degrees F to 165 degrees F. Rated at Shore 95A hardness and classified as flexible, it is suitable for installations that require repeated movement or vibration resistance. The coil ships as a 200 foot length, sold in 1 foot increments with a 25 foot minimum cut.

This polyurethane tube is used in industrial pneumatic systems, automation equipment, and compressed air distribution lines in both light commercial and industrial settings. It is listed as compatible with Coilock Push-to-Connect Fittings and Poly-Tube Fittings, making it straightforward to terminate without special tooling in most push-fit configurations. Maintenance technicians and pipefitters working on pneumatic circuits will find this tube a standard-use option for routing air lines through panels, machinery, and equipment enclosures.

Key Features

• 3/8 inch ID and 9/16 inch OD with 3/32 inch wall thickness for consistent fitment in push-to-connect systems
• 115 psi maximum working pressure rated for standard compressed air service
• Operating temperature range from -40 degrees F to 165 degrees F
• Shore 95A hardness with flexible rating for routing around bends and through tight spaces
• Clear tubing allows visual inspection of flow and fluid condition without cutting into the line
• UL94HB compliant flame rating

Compatibility

Designed for use with Coilock Push-to-Connect Fittings and Poly-Tube Fittings.

Installation Notes

Installation is typically performed by industrial maintenance technicians or pipefitters working on pneumatic control or air supply systems. Always depressurize and lock out the compressed air supply before cutting or terminating tubing. Use a clean, square cut with a dedicated tube cutter to ensure a proper seal in push-to-connect fittings. Verify fitting compatibility with the tube OD before assembly.