Coilhose Pneumatics PT0606-100TBD Polyurethane Tube 100 Ft

Product Description

The COILHOSE PNEUMATICS PT0606-100TBD is a flexible polyurethane pneumatic tube rated for demanding compressed-air and fluid-transfer applications. It measures 0.25 inches inside diameter and 0.375 inches outside diameter, supplied in a 100-foot coil. With a maximum working pressure of 147 psi and a service temperature range of -60 to 200 degrees F, this tube handles the thermal and pressure cycles common in industrial and shop-floor pneumatic systems. The 95A Shore hardness rating delivers a balance of flexibility and kink resistance that matters in routed or articulating installations. HVAC, plumbing, and industrial service technicians install this tube where push-to-connect fittings and clean routing are required.

This tube is suited for compressed-air distribution lines, tool feed lines, and light fluid-transfer runs in both shop and field environments. The blue color supports quick line identification in multi-circuit installations. At 100 feet per coil, the length accommodates most single-zone runs without a splice. The polyurethane construction resists abrasion and repeated flexing better than standard nylon or PVC alternatives, making it appropriate for applications where the line moves or vibrates during operation.

Key Features

• 147 psi maximum working pressure supports standard shop-air and pneumatic-tool supply lines
• Wide service temperature range of -60 to 200 degrees F for cold-weather outdoor and elevated-temperature indoor installs
• 95A Shore hardness provides flexible routing without kinking
• Polyurethane construction offers strong abrasion and flex-fatigue resistance
• Blue color aids circuit identification in multi-line installations
• UL94HB flame-spread compliance for installations in or near electrical enclosures
• Compatible with push-to-connect fittings for tool-free termination

Compatibility

Designed for use with Coilock Push-to-Connect Fittings and Poly-Tube Fittings as specified by the manufacturer. Suitable for general compressed-air and pneumatic-tool supply applications using 3/8-inch OD tube connections.

Installation Notes

Installation is typically performed by industrial maintenance technicians, pipefitters, or mechanical contractors familiar with pneumatic distribution systems. Depressurize and lock out the compressed-air supply before cutting or connecting tube. Use a clean, square tube cut to ensure a proper seal in push-to-connect fittings — a ragged or angled cut is a common source of fitting leaks. Secure the tube with appropriate clamps or clips to prevent chafing against edges or moving components.