Coilhose Pneumatics PT0203-2500K Polyurethane Tube 1/8 Od

Product Description

The COILHOSE PNEUMATICS PT0203-2500K is a flexible black polyurethane pneumatic tubing supplied in a 2,500-foot coil, sold in 1-foot increments with a 25-foot minimum cut length. Sized at 1/16 inch inside diameter and 1/8 inch outside diameter with a 1/32 inch wall thickness, this tubing handles working pressures up to 126 psi and operates across a temperature range of -40 to 165 degrees F. The Shore 95A hardness rating gives it the rigidity to hold its shape under pressure while remaining flexible enough for routing through tight spaces. It is a standard choice for low-volume pneumatic circuits in industrial and commercial automation applications.

This tubing is intended for use in compressed air and pneumatic control systems where small-diameter, lightweight tubing is required. It is compatible with Coilock push-to-connect fittings and Poly-Tube fittings as specified by the manufacturer. Typical installation scenarios include instrument air lines, sensor supply lines, and small actuator circuits in manufacturing, assembly, and process control environments. The 2,500-foot coil format suits shops and contractors who cut to length on the job or at the bench.

Key Features

• 1/16 inch ID and 1/8 inch OD with 1/32 inch wall thickness for precise sizing in small-bore pneumatic circuits
• Rated to 126 psi maximum working pressure
• Operating temperature range of -40 to 165 degrees F
• Shore 95A hardness — flexible yet kink-resistant
• UL94HB flame-retardant compliant construction
• Sold in 1-foot increments from a 2,500-foot coil with a 25-foot minimum cut length

Compatibility

Designed for use with Coilock push-to-connect fittings and Poly-Tube fittings per manufacturer specifications.

Installation Notes

Installation is typically performed by pneumatic system technicians or industrial maintenance professionals. Depressurize the air supply completely before cutting, inserting, or removing tubing from any fitting. Use a clean, square cut with a dedicated tubing cutter to ensure a proper seal at push-to-connect fittings — angled or ragged cuts can cause leaks or fitting damage. Follow applicable local and facility codes for pneumatic system installation and pressure ratings.