Coilhose Pneumatics PP0618S Lead-in Whip Hose 3/8 in

Product Description

The COILHOSE PNEUMATICS PP0618S is a lead-in whip hose designed to connect a compressed air supply line to a tool, reducing stress and vibration at the tool inlet. Built from polyurethane, this hose measures 3/8 inch inside diameter and 1.5 feet in length, making it a short, flexible transition section between a main air line and a pneumatic tool or fitting. It carries a working pressure rating of 140 psi and handles temperatures from -20 degrees F to 165 degrees F. Both ends terminate in MNPT swivel fittings sized at 3/8 inch, allowing easy connection without twisting the hose body. It weighs 0.3 pounds.

Lead-in whip hoses are standard in industrial, manufacturing, and commercial maintenance environments where pneumatic tools run continuously. The short length absorbs tool movement and reduces wear on the main air hose connection point. This hose suits air compressor drops, manifold outlets, and tool balancer stations. It is appropriate for general-purpose air lines carrying dry or lubricated compressed air within its rated pressure and temperature range.

Key Features

• 140 psi working pressure rating for general compressed air service
• Polyurethane construction resists abrasion and remains flexible in cold conditions
• 3/8 inch inside diameter provides adequate flow for most pneumatic hand tools
• MNPT swivel fittings on both ends allow connection without body twist
• Operating range of -20 degrees F to 165 degrees F suits most shop environments
• Compact 1.5-foot length acts as a flexible lead-in to reduce hose and fitting fatigue

Compatibility

Designed as an OEM-style replacement or supplemental lead-in whip hose for compressed air systems using 3/8 inch MNPT threaded connections and operating within a 140 psi working pressure limit.

Installation Notes

A licensed or qualified pneumatic systems technician should depressurize and bleed down the air line before disconnecting or installing any hose section. Apply thread sealant appropriate for compressed air to the MNPT threads before making up connections. Do not exceed the rated working pressure of 140 psi. Inspect the hose and fittings for leaks after pressurizing the system before returning tools to service.