Coilhose Pneumatics PP0436S Lead-in Whip Hose 1/4 in

Product Description

The COILHOSE PNEUMATICS PP0436S is a lead-in whip hose designed to serve as the flexible connection point between a pneumatic tool and a main air supply line or drop hose. Built from polyurethane, this 3-foot hose features a 1/4-inch inside diameter and is rated for a working pressure of 140 psi. Both ends terminate in male NPT swivel fittings, allowing the hose to rotate freely and reduce torque and kinking at the tool connection. The operating temperature range runs from -20 degrees F to 165 degrees F, making it suitable for both cold-weather outdoor work and warmer shop environments. Licensed pneumatic technicians, industrial maintenance mechanics, and trade professionals install this type of hose in compressed air distribution systems.

The PP0436S is used in industrial, commercial, and trade shop settings where a short, flexible drop connection between a retractable reel, overhead air line, or stationary drop point and a handheld pneumatic tool is required. The 3-foot length is the standard whip length for tool-side connections, providing enough flexibility to reduce hose fatigue and vibration transfer without excess slack. The MNPT swivel fittings on both ends allow use with standard 1/4-inch NPT air fittings common across air tools, regulators, and quick-connect bodies.

Key Features

• Polyurethane construction resists abrasion, oil, and kinking in demanding shop and field environments
• 140 psi working pressure rating suitable for standard compressed air tool applications
• 1/4-inch inside diameter sized for typical pneumatic hand tool air supply lines
• MNPT swivel fittings on both ends reduce hose twist and tool-side stress
• Wide temperature range of -20 degrees F to 165 degrees F supports year-round indoor and outdoor use
• 3-foot length provides flexible tool-side reach without excess hose bulk

Compatibility

Designed as a standard lead-in whip hose for use with 1/4-inch NPT pneumatic tool connections in compressed air distribution systems where MNPT swivel end fittings are required.

Installation Notes

Installation is performed by pneumatic system technicians or industrial maintenance personnel. Always depressurize and bleed the air supply line before connecting or disconnecting whip hose assemblies. Verify that all threaded NPT connections are sealed with thread sealant tape or compound rated for compressed air service and tightened to avoid leaks without over-stressing the fittings. Do not exceed the rated working pressure of 140 psi or operate outside the stated temperature range.