Coilhose Pneumatics PE2510-100KD Polyethylene Tube 100 Ft

Product Description

The COILHOSE PNEUMATICS PE2510-100KD is a flexible black polyethylene pneumatic tubing supplied in a 100-foot coil. With a 5/32 inch (0.156 inch) outside diameter and a 0.106 inch inside diameter, this tube handles working pressures up to 166 psi across a wide temperature range of -60 to 200 degrees F. Rated Shore D 50 hardness, it balances flexibility with enough rigidity for reliable routing in pneumatic control and instrumentation lines. FDA and NSF-51 compliance makes it suitable for applications where food-contact or potable-water adjacency is a consideration. Licensed plumbers, HVAC technicians, and pneumatic systems installers are the primary trades working with this product.

This tubing is designed for use with Coilock push-to-connect fittings and standard poly-tube fittings, making it a straightforward choice for compressed-air distribution, pneumatic control circuits, and low-pressure fluid transfer in both light industrial and commercial settings. The 100-foot coil length provides enough run for most single-zone pneumatic control layouts without a mid-run splice. Its black color and polyethylene construction resist moisture and many common shop chemicals encountered in mechanical room installations.

Key Features

• 5/32 inch OD (0.156 inch) with 0.106 inch ID for precise push-to-connect fitment
• Maximum working pressure of 166 psi
• Operating temperature range of -60 to 200 degrees F
• Shore D 50 hardness for flexible yet form-holding routing
• FDA and NSF-51 compliant for food-contact and potable-water adjacent installations
• Compatible with Coilock push-to-connect fittings and poly-tube fittings

Compatibility

Rated for use with Coilock push-to-connect fittings and poly-tube fittings as specified by the manufacturer.

Installation Notes

Installation should be performed by a qualified pneumatic systems technician, HVAC controls mechanic, or licensed plumber depending on the application. Depressurize and lock out the air supply before cutting or connecting tubing. Use a clean, square cut to ensure a proper seal at push-to-connect fittings. Do not exceed the rated 166 psi working pressure or operate outside the stated temperature limits.