Coilhose Pneumatics PE021-250D Polyethylene Tube 250 Ft

Product Description

The COILHOSE PNEUMATICS PE021-250D is a natural polyethylene pneumatic tubing supplied in a 250-foot coil. It features a 1/8-inch outside diameter and a 0.062-inch inside diameter, making it suited for small-bore pneumatic control lines and instrument air applications. Rated to 120 psi maximum working pressure, it handles temperatures from -60 degrees F to 200 degrees F, giving it a wide service range for both cold-environment and general-purpose shop-air use. HVAC technicians, pneumatic controls specialists, and industrial maintenance techs install this tubing for low-pressure signal lines, pilot air circuits, and instrument connections where flexible, lightweight tubing is required.

This tubing is used in residential and light commercial pneumatic control systems, compressor air distribution, and instrument tubing runs. Its natural color makes it easy to identify in multi-line installations. The 250-foot coil length is practical for service vehicles and job-site use, reducing the need for frequent splicing over longer runs. It is commonly routed through mechanical rooms, equipment cabinets, and along control panels where a small-diameter, flexible air line is needed.

Key Features

• 1/8-inch OD with 0.062-inch ID for small-bore pneumatic applications
• 120 psi maximum working pressure rating
• Wide temperature range: -60 degrees F to 200 degrees F
• Natural polyethylene construction — lightweight, flexible, and chemical-resistant
• 250-foot coil reduces splicing on longer pneumatic runs

Compatibility

Designed as a general-purpose polyethylene pneumatic tubing replacement compatible with standard 1/8-inch OD push-to-connect and compression fittings used in pneumatic control and instrument air systems.

Installation Notes

Installation should be performed by a qualified pneumatic controls or HVAC technician familiar with low-pressure air line work. Depressurize the system and verify zero pressure before cutting or connecting tubing. Use a clean, square cut to ensure a proper seal with push-to-connect or compression fittings. Do not exceed the rated working pressure or temperature limits of the tubing.