Coilhose Pneumatics LRM0606 Male Hose Connector 3/8 Npt Brass

Product Description

The COILHOSE PNEUMATICS LRM0606 is a barbed push-on hose male connector designed for use in compressed air and pneumatic fluid-transfer lines. Machined from brass, this fitting accepts a 3/8 inch barb on the hose end and threads into a 3/8 inch NPT female port on the equipment or manifold side. The push-on barb design allows for fast assembly with compatible reinforced hose without additional clamps in low-to-moderate pressure applications. With a maximum working pressure of 300 psi and a temperature range from -40 degrees F to 212 degrees F, the LRM0606 covers the majority of industrial and trade pneumatic service conditions. Plumbers, pipefitters, and pneumatic system technicians install this type of fitting during new installations and field repairs.

The LRM0606 is suited for compressed air distribution systems, pneumatic tool supply lines, and general-purpose fluid-transfer applications where an NPT-threaded male connection is required on one end and a barbed push-on hose connection is required on the other. It is appropriate for both shop and mobile service environments and is compatible with standard reinforced air hose with a 3/8 inch inside diameter. This fitting is a common replacement component on pneumatic assemblies in light industrial, mechanical service, and HVAC equipment rooms.

Key Features

• Barbed push-on hose end accepts 3/8 inch inside diameter hose for fast, tool-light assembly
• 3/8 inch NPT male thread for direct connection to female NPT ports on tools, manifolds, or equipment
• Brass construction provides corrosion resistance and compatibility with air, water, and many pneumatic fluids
• Rated to 300 psi maximum working pressure for standard compressed air service
• Wide service temperature range of -40 degrees F to 212 degrees F covers most shop and field conditions

Compatibility

Designed as an OEM-style replacement or new-installation fitting for pneumatic systems requiring a 3/8 inch NPT male threaded connection and a 3/8 inch barbed push-on hose termination.

Installation Notes

Installation is typically performed by a licensed plumber, pipefitter, or qualified pneumatic systems technician. Shut off and bleed down the compressed air supply before removing or installing any fittings. Apply thread sealant tape or compound to the NPT threads in accordance with local codes before tightening. Inspect the hose end for proper seating on the barb before returning the system to service.