Coilhose Pneumatics 616P-S Air Blow Gun Safety Extension

Product Description

The COILHOSE PNEUMATICS 616P-S is a thumb-lever air blow gun with a 16-inch safety extension tube, designed for compressed-air cleaning and drying tasks in industrial, shop, and trade environments. The zinc body carries a black corrosion-resistant coating, while the brass nozzle delivers up to 10 SCFM of airflow through a 1/4 NPT inlet. The safety extension tube keeps the discharge point at a compliant distance from the operator, meeting OSHA 1910.242(b) dead-end pressure requirements. The ergonomic thumb-lever design is an updated take on the traditional form factor, reducing hand fatigue during extended use.

This blow gun is suited for production floors, automotive shops, HVAC service bays, plumbing shops, and general mechanical workspaces where compressed-air blow-off tasks are routine. The 16-inch extension tube is particularly useful when clearing debris from confined spaces, deep cavities, or areas where direct hand placement is impractical. Technicians working under OSHA 1910.95 noise-exposure guidelines will note the rated decibel range of 84 to 87 dB, which falls within ranges that may require hearing protection depending on duration and site policy.

Key Features

• OSHA 1910.242(b) compliant safety extension tube limits dead-end pressure
• 16-inch brass nozzle extension reaches confined or hard-to-access areas
• 10 SCFM airflow through a 1/4 NPT inlet connection
• Zinc body with black premium coating for enhanced corrosion resistance
• Ergonomic thumb-lever trigger redesigned from traditional models for reduced hand fatigue
• Decibel rating of 84 to 87 dB — hearing protection may be required per site safety policy

Compatibility

Designed as a standard replacement or addition for compressed-air tool setups using 1/4 NPT inlet fittings in industrial and trade shop environments.

Installation Notes

Installation is performed by a qualified technician or maintenance professional. Depressurize the air supply line fully before connecting or disconnecting the blow gun. Thread the 1/4 NPT inlet fitting by hand first to avoid cross-threading, then tighten with an appropriate wrench — do not overtighten zinc-body fittings. Confirm the connected air supply pressure is within the rated operating range for the tool before resuming use.