Climax Metal Products C193M-15 Shaft Locking Device 15mm

Product Description

The CLIMAX METAL PRODUCTS C193M-15 is a shaft locking device designed to secure rotating shafts and hubs in mechanical drive assemblies. With a 15mm bore diameter and a 1-3/16 inch outer diameter, this compact locking collar transmits torque and axial load between a shaft and a mating hub or component. It uses 6 M4 screws to generate clamping force, rated for up to 970 ft/lb maximum torque and 3,286 lb axial load. The 1-5/16 inch overall width and 0.472 inch thrust ring width allow it to fit into tight axial spaces. It is installed by mechanical and industrial maintenance technicians on motors, gearboxes, conveyors, and similar rotating equipment.

This shaft locking device is suited for light industrial and commercial mechanical drive applications where a reliable, fastener-secured shaft-to-hub connection is required. It is applicable to conveyor systems, pump drives, fan shafts, and other power transmission setups where a 15mm bore shaft is present. The 6-screw design provides even clamping force distribution around the shaft circumference, reducing the risk of shaft fretting or migration under cyclical loading.

Key Features

• 15mm bore diameter fits standard metric shaft sizes
• 6 M4 clamping screws distribute load evenly around the shaft
• Rated for 3,286 lb axial load and up to 970 ft/lb maximum torque
• 1-5/16 inch overall width suits compact axial envelope requirements
• 0.472 inch thrust ring width provides axial positioning reference
• 1-3/16 inch outer diameter allows use in space-constrained hub bores

Compatibility

Designed as an OEM-style replacement or aftermarket shaft locking device for mechanical drive assemblies with a 15mm bore shaft and sufficient hub clearance for a 1-3/16 inch outer diameter collar.

Installation Notes

Installation is typically performed by a mechanical or industrial maintenance technician. De-energize and lock out all power to the drive system before installing or removing this device. Tighten the M4 screws in an alternating cross pattern to achieve even clamping force; refer to the manufacturer torque specification sheet for fastener torque values. Do not exceed the rated axial load or torque values for this device in service.