Cleveland C71132 Jobber Drill Bit No. 32 Hss Oxide

Product Description

The CLEVELAND C71132 is a jobber-length twist drill bit sized to No. 32 wire gauge, equivalent to 0.116 inches in diameter. Manufactured from high speed steel with an oxide coating, it is designed for general-purpose drilling in a wide range of materials including mild steel, aluminum, wood, and plastics. The 118-degree standard point angle and web-thinned tip reduce entry force and improve centering at the start of a cut. With an overall length of 2.75 inches and a 1.625-inch spiral flute, this bit fits standard drill chucks and is suited for use in production shops, maintenance environments, and field service work by machinists, mechanics, and trade professionals.

This bit is intended for general-purpose drilling applications in both shop and field settings. The straight cylindrical shank fits directly into standard three-jaw drill chucks on handheld drills, drill presses, and CNC drilling equipment. The 4xD flute-to-diameter ratio provides adequate chip clearance for most common materials at typical feed and speed rates. It is appropriate for light to medium-duty work in residential, commercial, and industrial maintenance scenarios where a precision wire-gauge diameter hole is required.

Key Features

• No. 32 wire size — 0.116 inches diameter with a tight tolerance of -0.0005 to 0.0000 inches
• High speed steel construction with oxide coating for improved surface hardness and corrosion resistance
• 118-degree standard point angle with web-thinned, tapered web for reduced thrust and cleaner entry
• 2-flute regular spiral design promotes efficient chip evacuation during drilling
• Straight cylindrical shank compatible with standard drill chucks
• Manufactured to ASME B94.11M and DIN 338 standards

Compatibility

Designed as a general-purpose jobber-length drill bit suitable for use in standard three-jaw drill chucks on handheld drills, drill presses, and compatible CNC drilling equipment that accept a 0.116-inch straight shank.

Installation Notes

Secure the shank fully in the chuck and verify the bit runs true before beginning a cut. Always wear appropriate eye protection when drilling. Match spindle speed to the material being drilled — harder materials require lower RPM and steady feed pressure. Inspect the cutting edges before each use and replace the bit if the point is chipped or the flutes are clogged.