Charlotte Pipe PVC160120600HC Sdr 26 Pvc Pipe 1-1/4x10

Product Description

The Charlotte Pipe Foundry PVC160120600HC is a solid-wall, plain-end PVC pressure pipe rated at 160 psi and manufactured to SDR 26 dimensional standards. Measuring 1-1/4 inches in diameter and 10 feet in length, this pipe is built for pressure service applications where consistent wall thickness and dimensional accuracy are critical. It conforms to ASTM D-2241 and meets NSF Standard 14 and 61, making it suitable for potable water systems and other pressure-rated installations. Licensed plumbers and irrigation contractors are the primary installers of this product.

This pipe is used in residential and light commercial pressure piping systems, including potable water supply lines, irrigation mains, and general pressure distribution applications. Its plain-end configuration accepts solvent-weld fittings or mechanical couplings appropriate for SDR 26 PVC service. The 160 psi pressure rating makes it a practical choice for municipal-style water service laterals, irrigation headers, and similar moderate-pressure runs. It ships in a package quantity of 5 pieces per unit.

Key Features

• 160 psi pressure rating suitable for potable water and irrigation pressure service
• SDR 26 solid wall construction per ASTM D-2241 for consistent wall thickness
• NSF Standard 14 and 61 certified for safe use in potable water systems
• Plain-end design compatible with solvent-weld fittings and mechanical couplings
• 1-1/4 inch diameter by 10-foot length for straightforward field cutting and installation

Compatibility

Designed as an OEM-style pressure pipe for use with standard SDR 26 PVC solvent-weld and mechanical fittings in potable water, irrigation, and general pressure piping systems.

Installation Notes

Installation should be performed by a licensed plumber or qualified irrigation contractor in accordance with applicable local plumbing codes and ASTM D-2241 guidelines. Shut off the supply pressure and depressurize the line before cutting or joining pipe. Use only PVC-rated solvent cement and primer appropriate for pressure service when making solvent-weld joints. Allow full cure time before pressurizing the system.