Charlotte Pipe PVC100200600 Sch 80 Pvc Pipe 2in X 20ft 400 Psi

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC100200600 is a Schedule 80, solid-wall PVC pipe rated for pressure applications in plumbing, industrial, and mechanical systems. Measuring 2 inches in diameter and 20 feet in length, this gray pipe carries a 400 psi pressure rating and ships in a package quantity of 10. It conforms to Type 1, Grade 1 PVC material classification per ASTM D-1784 and dimensional standards per ASTM D-1785. Plain ends allow for standard solvent-cement socket fittings or threaded adapters. Licensed plumbers and pipefitters install this pipe in both above-ground and in-wall pressure distribution systems where a higher wall thickness than Schedule 40 is required.

This pipe is suited for residential and commercial pressure applications including cold and hot water distribution, chemical conveyance, and irrigation mainlines where a heavier wall profile is required. The Schedule 80 wall thickness provides added mechanical strength and impact resistance compared to standard Schedule 40 pipe. NSF Standard 14 and 61 certifications confirm the pipe meets requirements for potable water contact, making it appropriate for drinking water supply systems in addition to non-potable pressure applications.

Key Features

• Schedule 80 solid wall construction for higher pressure and impact resistance than Schedule 40
• 400 psi pressure rating suitable for demanding pressure distribution applications
• Plain end design compatible with solvent-cement socket fittings and threaded adapters
• Type 1, Grade 1 PVC material per ASTM D-1784 for consistent material quality
• NSF Standard 14 and 61 certified for potable water contact applications
• Gray color standard for Schedule 80 PVC pressure pipe identification

Compatibility

Designed for use with Schedule 80 PVC socket and threaded fittings in pressure piping systems. Conforms to ASTM D-1785 dimensional standards, ensuring compatibility with standard 2-inch Schedule 80 fittings and couplings from manufacturers following the same specification.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable codes including the International Plumbing Code (IPC) and local authority requirements. Shut off system pressure and depressurize the line completely before cutting or joining pipe. Use only listed PVC solvent cement and primer appropriate for Schedule 80 pipe and the intended service conditions. Do not use this pipe for compressed air or gas service unless explicitly permitted by local code and the system designer.