Charlotte Pipe PVC074000600RS Sch 40 Pvc Pipe 4in X 10ft

Product Description

The Charlotte Pipe Foundry Co. PVC074000600RS is a Schedule 40 PVC pipe rated for both pressure and drain-waste-vent (DWV) applications. It features a solid wall construction with plain ends and a 220 psi pressure rating, making it suitable for a wide range of residential and light commercial plumbing systems. At 4 inches in diameter and 10 feet in length, this pipe meets ASTM D-1785 for pressure service and ASTM D-2665 for DWV service. It also carries NSF Standard 14 and NSF Standard 61 certifications, confirming it is safe for potable water contact. Licensed plumbers and pipefitters are the primary installers of this product.

This pipe is used in residential and commercial plumbing systems where a single pipe must serve both pressure and DWV functions. Typical applications include drain lines, waste stacks, vent piping, and cold-water pressure distribution. The plain end configuration accepts standard Schedule 40 solvent-weld fittings. The 4-inch diameter makes it common in main drain runs, building drains, and horizontal waste branches that require adequate flow capacity.

Key Features

• Schedule 40 solid wall construction for full-rated pressure performance
• 220 psi pressure rating suitable for pressure and DWV service
• Plain end design compatible with standard solvent-weld Schedule 40 fittings
• Meets ASTM D-1785 (pressure pipe) and ASTM D-2665 (DWV pipe) standards
• NSF Standard 14 and NSF Standard 61 certified for potable water applications
• 4-inch diameter x 10-foot length for main drain and waste branch installations

Compatibility

Designed as an OEM-style replacement and new-installation pipe compatible with standard Schedule 40 PVC solvent-weld fittings and couplings in pressure and DWV plumbing systems.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local codes. Shut off the water supply and depressurize the line before cutting into any existing system. Use an approved PVC primer and solvent cement rated for Schedule 40 pipe when making solvent-weld joints, and allow full cure time before pressurizing. Do not use this pipe for hot-water distribution or applications exceeding its rated pressure or temperature limits.