Charlotte Pipe PVC072000600 Sch 40 Pvc Pipe 2in X 10ft 280 Psi

Product Description

The Charlotte Pipe Foundry Co. PVC072000600 is a Schedule 40 solid-wall PVC pipe measuring 2 inches in diameter and 10 feet in length. It is rated for 280 psi working pressure and carries plain ends for field-cut, solvent-welded, or mechanical joining. This pipe meets ASTM D-1785 for pressure service and ASTM D-2665 for drain, waste, and vent (DWV) applications, making it one of the few Schedule 40 PVC products certified for both service types. NSF Standard 14 and NSF Standard 61 listings confirm it is suitable for potable water contact. Licensed plumbers and pipefitters are the primary installers in residential and light commercial systems.

This pipe is appropriate for cold and ambient-temperature pressure water distribution, drain-waste-vent rough-in, and irrigation supply lines in residential and light commercial construction. Its dual ASTM certification means a single pipe stock covers both pressure supply and gravity DWV rough-in on the same job. Plain-end construction supports standard PVC solvent cement joints per ASTM D-2564 or push-fit mechanical couplings where code allows. It is not rated for hot-water supply, compressed air, or gas service.

Key Features

• Schedule 40 solid wall construction rated to 280 psi at standard temperature
• Dual-listed for pressure service (ASTM D-1785) and DWV applications (ASTM D-2665)
• NSF Standard 14 and NSF Standard 61 listed for potable water contact
• Plain ends accept solvent cement joints or mechanical couplings
• 2-inch nominal diameter, 10-foot length for standard rough-in cuts

Compatibility

Designed as an OEM-style replacement and new-construction Schedule 40 PVC pipe for residential and light commercial pressure water distribution and DWV systems where ASTM D-1785 and ASTM D-2665 compliance is required.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local amendments. Shut off and depressurize the water supply completely before cutting into any existing line. Use a PVC pipe cutter or fine-tooth saw, deburr cut ends thoroughly, and apply ASTM D-2564-compliant solvent cement to both the pipe end and fitting socket before joining. Do not use this pipe for compressed air, gas, or hot-water supply applications.