Charlotte Pipe PVC043000600 Sch 40 Foam Core Pvc Dwv Pipe

Product Description

The Charlotte Pipe Foundry PVC043000600 is a Schedule 40 foam core PVC pipe designed for drain, waste, and vent (DWV) applications in non-pressure systems. Measuring 3 inches in diameter and 10 feet in length, this pipe features a plain end configuration and a cellular core (foam core) construction that reduces weight compared to solid-wall PVC while maintaining the structural profile of full Schedule 40 pipe. It is intended for licensed plumbers installing interior DWV rough-in systems in residential and light commercial construction. Compliance with ASTM F-891 and NSF Standard 14 confirms the pipe meets established performance and safety criteria for this application class.

This pipe is suited for interior, non-pressure drain, waste, and vent installations where foam core PVC is permitted by the local plumbing code. Typical uses include horizontal drain runs, vertical stack sections, and vent branches within building wall and floor cavities. The plain end allows connection using standard PVC DWV solvent-weld fittings. It is not rated for pressure service, outdoor UV exposure, or applications requiring solid-wall Schedule 40 pipe per local code requirements. Always verify local code acceptance of foam core PVC before installation.

Key Features

• Foam core (cellular core) construction reduces pipe weight while maintaining Schedule 40 outside diameter dimensions
• Plain end design accepts standard PVC DWV solvent-weld couplings and fittings
• Rated for non-pressure DWV service only — not for pressure piping systems
• Complies with ASTM F-891 for cellular-core PVC pipe
• Listed to NSF Standard 14 for plastic piping system components
• 3-inch diameter x 10-foot length suits common residential and light commercial drain and vent rough-in

Compatibility

Designed for use in non-pressure DWV piping systems where Schedule 40 foam core PVC pipe conforming to ASTM F-891 is accepted. Connects using standard 3-inch PVC DWV solvent-weld fittings. Verify local plumbing code acceptance of cellular core PVC prior to installation.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) or applicable local plumbing code, which governs permitted pipe materials for DWV systems. Shut off the water supply and verify the system is depressurized before cutting into any existing piping. Use a fine-tooth saw or plastic pipe cutter for clean cuts, deburr cut ends, and apply PVC primer and solvent cement rated for DWV service per the fitting and cement manufacturer instructions. Do not use this pipe in pressure, potable supply, or outdoor UV-exposed applications.