Charlotte Pipe pvc-444x-10in Cleanout Tee 10 in Sch 40 Pvc

Product Description

The CHARLOTTE PIPE pvc-444x-10in is a 10-inch PVC cleanout tee with plug, designed for sanitary drain, waste, and vent (DWV) applications in gravity-fed waste elimination systems. This fitting features Hub x Hub x FPT connections and is manufactured to SCH 40 Schedule specifications. Rated for non-pressure service at temperatures up to 140 degrees F, it is well suited to residential and light commercial drain and waste rough-in work. The white PVC construction is lightweight, keeping handling and positioning straightforward during installation.

This cleanout tee is used in sanitary DWV piping systems where cleanout access is required at a tee junction. The 10-inch size targets main-line drain runs and larger trunk lines typical in commercial construction, multi-family residential builds, and municipal-scale drain work. The female pipe thread (FPT) cleanout outlet accepts a standard threaded plug for sealed access. Plumbers and pipefitters install this fitting during rough-in phases wherever code requires accessible cleanouts on horizontal drain runs or building drains.

Key Features

• SCH 40 PVC construction rated for non-pressure DWV service up to 140 degrees F
• Hub x Hub x FPT connection configuration with threaded cleanout plug included
• 10-inch pipe size for main-line drain and building drain applications
• Lightweight material supports faster handling on large-diameter rough-in work
• Compatible with solvent cement joining on hub ends; FPT outlet accepts standard threaded plug
• Manufactured in the USA

Compatibility

Designed as an OEM-style DWV replacement and new-construction fitting for SCH 40 PVC sanitary drain, waste, and vent piping systems using 10-inch pipe.

Installation Notes

Installation is performed by licensed plumbers in accordance with the International Plumbing Code (IPC) and applicable local amendments. Shut off all flow and verify the line is depressurized and drained before cutting into an existing system. Hub connections require proper PVC primer and solvent cement applied per the cement manufacturer's instructions; the FPT cleanout plug should be hand-tightened and then wrench-snugged with appropriate pipe wrenches. Do not use this fitting in pressure piping, outdoor UV-exposed locations without protective coating, or above the rated temperature limit.

Technical Specifications

• Pipe Size: 10 inches
• Connection Type: Hub x Hub x FPT
• Schedule: SCH 40
• Material: PVC
• Color: White
• Max Temperature Rating: 140 degrees F
• Application: Sanitary DWV (Non-Pressure)
• Country of Origin: USA

Standard Information

• Brand: CHARLOTTE PIPE
• Manufacturer Part Number: pvc-444x-10in