Charlotte Pipe Pvc 20010B 0600 Sdr 21 Pvc Pipe 1in X 20ft

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 20010B 0600 is a solid-wall, SDR 21 PVC pressure pipe rated for 200 psi service. Each stick measures 1 inch in diameter and 20 feet in length with a bell end for straightforward solvent-weld or gasketed joining. This pipe meets ASTM D-2241 dimensional and performance standards and carries NSF Standard 14 and 61 certification, making it suitable for potable water systems. Licensed plumbers and irrigation contractors are the primary installers of this product in residential and commercial pressure piping applications.

This pipe is used in underground and above-grade pressure water distribution, irrigation mainlines, and other systems where a lightweight, corrosion-resistant pressure pipe is specified. The SDR 21 wall ratio delivers a consistent 200 psi pressure rating across the full 1-inch diameter. It is appropriate for residential water service lines, agricultural irrigation systems, and commercial site utility work where PVC pressure pipe conforming to ASTM D-2241 is called out on the plans.

Key Features

• 200 psi pressure rating throughout the full length of the pipe
• SDR 21 solid wall construction per ASTM D-2241
• Bell end factory-formed for direct joining without a separate coupling at each joint
• NSF Standard 14 and 61 certified for use in potable water systems
• Lightweight PVC material resists corrosion, scale, and chemical attack from soil and water
• Packaged in quantities of 10 sticks for efficient jobsite delivery

Compatibility

Designed as an OEM-style replacement or new-installation pipe for pressure water systems requiring 1-inch SDR 21 PVC pipe conforming to ASTM D-2241 and NSF Standard 14 and 61.

Installation Notes

Installation of PVC pressure pipe should be performed by a licensed plumber or qualified irrigation contractor in accordance with local plumbing codes and ASTM D-2321 trench and bedding guidelines where applicable. Shut off and depressurize the system completely before cutting into any existing line. Use a fine-tooth saw or pipe cutter rated for PVC, deburr all cut ends, and apply solvent cement or gaskets appropriate for potable water service per the fitting manufacturer instructions. Avoid exposing unprotected PVC pipe to prolonged direct UV unless a UV-resistant coating or burial is specified.