Charlotte Pipe Pvc 08302 1200HA Sch 80 3/4 in 90 Elbow

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 08302 1200HA is a 3/4-inch Schedule 80 PVC 90-degree elbow with female pipe thread on both ends, designed for pressure piping systems that demand higher wall thickness and greater mechanical strength than standard Schedule 40 fittings. The gray color indicates Schedule 80 material, consistent with industry convention. This fitting is rated for use in demanding industrial, commercial, and plumbing applications where durability and chemical resistance are required. Licensed plumbers and pipefitters typically install this type of fitting in systems carrying water, chemicals, or compressed air.

This elbow is suited for residential and commercial plumbing systems, industrial process piping, and irrigation applications where a 90-degree directional change is needed at a 3/4-inch pipe junction. The female pipe thread on both ends allows connection to threaded pipe or fittings without solvent welding at the joint, making it appropriate for systems requiring disassembly or where cementing is not practical. It is sold in packages of 15 units per the supplier data.

Key Features

• Schedule 80 PVC construction for higher pressure ratings and greater wall thickness compared to Schedule 40
• 90-degree elbow geometry for right-angle directional changes in piping runs
• Female pipe thread on both ends (TxT) for threaded assembly without solvent cement at the connection point
• Gray color coding consistent with PVC Schedule 80 industry standard identification
• Sold in packages of 15 for job-lot or stocking orders
• Universal cross-reference part 808-007

Compatibility

Designed as an OEM-style replacement and standard fitting for 3/4-inch Schedule 80 PVC pressure piping systems. Cross-references to universal part 808-007 as noted in the product data.

Installation Notes

Installation of threaded PVC fittings should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Before beginning work, shut off the water supply and depressurize the line completely. Use thread sealant tape or an approved pipe dope rated for PVC on all threaded connections; do not overtighten, as PVC threads can crack under excessive torque. Avoid using metal wrenches directly on PVC fittings without protective padding to prevent crushing the fitting body.