Charlotte Pipe Pvc 07200 0200HA Sch 40 Pvc Dwv Pipe 2x2

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 07200 0200HA is a Schedule 40 PVC pipe rated for both drain, waste, and vent (DWV) applications as well as cold water pressure service. Each stick measures 2 inches in diameter and 2 feet in length. The pipe carries a 280 psi cold water pressure rating, making it dual-purpose for both DWV and pressure systems within the same installation. It is sold in packages of 16 lengths. Licensed plumbers and pipefitters install this pipe in residential and light commercial plumbing systems where a reliable, code-compliant PVC solution is required.

This pipe is suited for indoor drain, waste, and vent systems as well as cold water supply runs where pressure-rated PVC pipe is specified. The 2-inch diameter is a common size in residential bathroom drain lines, sink drains, and vent stacks. When this pipe is used in a pressure application, pressure-rated fittings must be used — DWV fittings are not acceptable substitutes in pressurized service. The 2-foot length is useful for close-quarter runs, repairs, and cut-ins where full-length sticks are impractical.

Key Features

• Dual-rated for DWV and cold water pressure service up to 280 psi
• Schedule 40 wall thickness meets standard dimensional requirements for 2-inch PVC pipe
• 2-inch diameter fits standard PVC DWV and pressure fittings and couplings
• 2-foot length is well suited for repair work, offsets, and tight spaces
• Sold in a package of 16 lengths for job-site efficiency
• Pressure applications require pressure-rated fittings — not DWV fittings

Compatibility

Designed for use with standard 2-inch Schedule 40 PVC DWV fittings for drain, waste, and vent applications, and with 2-inch Schedule 40 PVC pressure fittings when used in cold water pressure service.

Installation Notes

Installation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local amendments. Shut off the water supply and depressurize the line before cutting into any existing system. Solvent-cement joints require proper primer and cement rated for PVC pipe; follow manufacturer cure times before pressurizing. When this pipe is installed in a pressure application, only pressure-rated fittings may be used — DWV fittings must not be substituted.