Charlotte Pipe Pvc 02410 1000HA 1-1/4 in Pvc Cross Fitting

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02410 1000HA is a 1-1/4 inch Schedule 40 PVC cross fitting with four slip (socket) connections arranged in a cross pattern. It provides two simultaneous horizontal branches off a vertical vent or waste line, making it a practical solution where a single vertical run must feed or receive flow from two lateral directions at the same point. The fitting is white PVC and meets ASTM D 2466 requirements for socket-type fittings. Plumbers and irrigation contractors install this fitting in both drain-waste-vent configurations and pressurized sprinkler and irrigation distribution systems.

This cross fitting is suited for residential and light commercial applications where a pipeline must split into four directions at a single junction. It is commonly installed in sprinkler and irrigation systems to distribute water to multiple zones from a single supply point. The slip connections accept standard 1-1/4 inch PVC pipe with solvent cement, keeping installation straightforward in both above-ground and below-grade layouts. The white finish is standard for Schedule 40 PVC cross fittings used in DWV and irrigation service.

Key Features

• Four-way slip (socket) connection — accepts 1-1/4 inch PVC pipe on all four ports
• Provides two simultaneous horizontal branches to a vertical vent or waste line
• Suitable for use in sprinkler and irrigation systems
• Meets ASTM D 2466 requirements for Schedule 40 PVC socket-type fittings
• White PVC construction resistant to corrosion and chemical degradation in standard service
• Sold in package quantities of 25 units per package

Compatibility

Designed as an OEM-style replacement and standard-service fitting compatible with 1-1/4 inch Schedule 40 PVC pipe and fittings systems used in DWV, sprinkler, and irrigation applications conforming to ASTM D 2466.

Installation Notes

Installation should be performed by a licensed plumber or qualified irrigation contractor in accordance with applicable local plumbing codes and ASTM D 2466 standards. Shut off water supply and depressurize the line before cutting into any existing piping. Clean and dry all mating surfaces, apply PVC primer and solvent cement per manufacturer instructions, and allow full cure time before restoring flow. Do not use this fitting in applications exceeding the pressure and temperature ratings for Schedule 40 PVC.