Charlotte Pipe Pvc 02410 0600HA 3/4 in Pvc Cross Fitting

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02410 0600HA is a 3/4-inch, four-way PVC cross fitting with a Slip x Slip x Slip x Slip (SxSxSxS) connection pattern. It provides two simultaneous horizontal branches off a single vertical run, making it the correct choice when a plumbing or irrigation line must split in two directions at the same point. Constructed in white PVC and compliant with ASTM D 2466, this fitting is a standard schedule 40-style cross used by plumbers and irrigation installers in residential and light commercial work. The fitting is sold as individual units packaged in quantities of 25.

This cross fitting is used primarily in sprinkler and irrigation system piping where lateral distribution from a main line is required at a single node. It is also suited for drain, waste, and vent (DWV) applications where two horizontal branches must tie into a vertical vent or waste line simultaneously. The all-slip socket design accepts solvent-welded PVC pipe connections on all four ports, keeping the installation straightforward and leak-resistant when properly primed and cemented.

Key Features

• Four-way Slip x Slip x Slip x Slip configuration allows two horizontal branches from one vertical line
• 3/4-inch nominal size fits standard 3/4-inch schedule 40 PVC pipe
• White PVC construction resists corrosion and common irrigation chemicals
• Meets ASTM D 2466 standard specification for PVC pressure-rated fittings
• Packaged 25 units per pack, suitable for contractor-quantity stocking

Compatibility

Designed as an OEM-style replacement and new-installation fitting for 3/4-inch schedule 40 PVC piping systems used in sprinkler, irrigation, and DWV applications. Complies with ASTM D 2466 for use in systems where that standard is specified.

Installation Notes

Installation should be performed by a licensed plumber or qualified irrigation technician in accordance with applicable local plumbing codes. Shut off and depressurize the supply line completely before cutting into any existing piping. Use a PVC-compatible primer and solvent cement rated for the pipe schedule and service conditions; allow full cure time before repressurizing. Do not over-apply cement or force-fit pipe into sockets, as excess solvent can degrade the fitting interior.