Charlotte Pipe Pvc 02401 4300HA Reducing Tee 1-1/2x1-1/2x1/2

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02401 4300HA is a Schedule 40 PVC reducing tee designed to connect a smaller branch line to a main run of pipe. It features a 1-1/2 inch by 1-1/2 inch by 1/2 inch configuration with a Slip x Slip x Thread end pattern, allowing solvent-welded connections on the run ends and a threaded branch outlet. The fitting is white PVC and meets ASTM D 2466 requirements. Plumbers and irrigation contractors install this fitting where a half-inch threaded branch tap is needed off a 1-1/2 inch PVC main line.

This reducing tee is suited for residential and light commercial sprinkler and irrigation systems where pressure-rated PVC fittings are required. The slip run connections accept standard 1-1/2 inch PVC pipe solvent-welded in place, while the 1/2 inch threaded branch accommodates threaded risers, valves, or heads common in irrigation layouts. It is sold in a package quantity of 25 units, making it practical for contractors outfitting multiple zones or completing a full system installation in a single order.

Key Features

• 1-1/2 inch x 1-1/2 inch x 1/2 inch reducing tee configuration for branch-to-run connections
• Slip x Slip x Thread end pattern supports solvent-weld run connections with a threaded branch outlet
• Meets ASTM D 2466 requirements for Schedule 40 PVC pressure fittings
• White PVC construction compatible with standard irrigation and plumbing PVC pipe
• Packaged in quantities of 25 units for contractor-level jobsite supply

Compatibility

Designed as an OEM-style Schedule 40 PVC fitting for use in sprinkler and irrigation systems requiring a 1-1/2 inch slip run by 1/2 inch threaded branch reducing tee configuration per ASTM D 2466.

Installation Notes

Installation is performed by licensed plumbers or qualified irrigation contractors. Shut off system water supply and relieve line pressure before cutting into any existing pipe. Use the appropriate PVC primer and solvent cement on slip connections per manufacturer instructions and local plumbing code requirements. Thread connections should be made with compatible fittings and sealed with thread sealant tape or compound rated for PVC use.