Charlotte Pipe Pvc 02401 3300HA Pvc Reducing Tee 1x1x3/4 in

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02401 3300HA is a PVC Schedule 40 reducing tee designed to connect a smaller branch line to a main pipe run. The fitting measures 1 inch by 1 inch by 3/4 inch and is configured Slip x Slip x Thread, meaning the two run ends accept solvent-welded pipe while the branch end accepts a threaded connection. Manufactured in white PVC, this tee meets the requirements of ASTM D 2466, confirming it is rated for standard pressure service in cold-water plumbing and irrigation applications. Licensed plumbers and irrigation contractors are the typical installers.

This reducing tee is suited for residential and light commercial sprinkler and irrigation systems where a 3/4-inch threaded branch must be tapped off a 1-inch main line. It is also used in general PVC pressure plumbing where a branch takeoff is needed without cutting into a full-size fitting. The Slip x Slip run connections allow fast, solvent-weld assembly in the field. The fitting is sold individually but is packaged in quantities of 25, making it practical for contractors stocking job boxes or service vehicles.

Key Features

• 1 inch x 1 inch x 3/4 inch reducing configuration for branch-line takeoffs
• Slip x Slip x Thread end connections for solvent-weld run with threaded branch
• Meets ASTM D 2466 requirements for PVC Schedule 40 pressure fittings
• White PVC construction resistant to corrosion and scale buildup
• Designed for sprinkler and irrigation system installation
• Packaged 25 per unit for contractor-quantity purchasing

Compatibility

Designed for use in sprinkler and irrigation systems as an OEM-style PVC Schedule 40 pressure fitting; compatible with standard 1-inch and 3/4-inch Schedule 40 PVC pipe conforming to ASTM D 2466.

Installation Notes

Installation is typically performed by a licensed plumber or certified irrigation contractor in accordance with local plumbing codes and ASTM D 2466 requirements. Shut off and depressurize the water supply before cutting into the existing line. Use the appropriate PVC primer and solvent cement on the Slip connections per manufacturer and code requirements; do not apply solvent cement to the threaded branch. Apply thread sealant tape or compound to the male threaded fitting before assembly on the Thread end.