Charlotte Pipe Pvc 02401 0600HA Pvc Tee 1/2 in Slip X Thread

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02401 0600HA is a 1/2-inch Schedule 40 PVC tee fitting configured in a Slip x Slip x Thread (SxSxT) arrangement. It joins a branch pipe into a run of pipe, allowing flow to be diverted or combined at a single connection point. The two slip ends accept solvent-welded socket connections while the threaded outlet accommodates a male NPT threaded fitting. This tee is manufactured in white PVC and meets ASTM D 2466 standards. Licensed plumbers and irrigation technicians are the primary installers of this fitting.

This fitting is designed for use in sprinkler and irrigation systems where a branch connection is needed along a main run of 1/2-inch PVC pipe. Its combination of slip and threaded ports makes it well-suited for layouts that transition between solvent-welded PVC runs and threaded control valves, risers, or heads. The fitting ships in a package quantity of 25 units, making it practical for contractors stocking up for residential or light commercial irrigation installations.

Key Features

• Slip x Slip x Thread configuration for flexible connection between solvent-welded and threaded pipe segments
• Meets ASTM D 2466 dimensional and pressure standards for Schedule 40 PVC fittings
• White PVC construction suited for above-ground and buried irrigation applications
• 1/2-inch port size compatible with standard half-inch PVC pipe and fittings
• Packaged in quantities of 25 for contractor and service use

Compatibility

Designed as an OEM-style replacement or new-installation fitting for 1/2-inch Schedule 40 PVC piping systems used in sprinkler and irrigation applications meeting ASTM D 2466 requirements.

Installation Notes

Installation is typically performed by licensed plumbers or irrigation technicians. Shut off system water supply and depressurize the line before cutting into any existing pipe. Slip connections require proper PVC primer and solvent cement applied per the cement manufacturer instructions and applicable plumbing codes. The threaded port should be assembled with PTFE thread tape or an approved pipe thread sealant to ensure a leak-free joint.