Charlotte Pipe Pvc 02400 1200HA 1-1/4 in Slip Tee

Product Description

The Charlotte Pipe Foundry PVC 02400 1200HA is a Schedule 40 PVC tee fitting designed to join a branch pipe into a continuous run of pipe. Built from white PVC, it features a Slip x Slip x Slip connection on all three ports, accepting solvent-welded pipe ends without threads. At 1-1/4 inches, this tee is sized for standard irrigation and sprinkler trunk lines. It meets ASTM D 2466 requirements, confirming dimensional and pressure-rating compliance for Schedule 40 PVC fittings. Plumbers and irrigation technicians install this fitting during new system layout or repair work where a branch line must be introduced into an existing flow path.

This tee fitting is used in residential and light commercial sprinkler and irrigation systems where PVC Schedule 40 pipe is the specified material. It is suited for cold-water distribution, lawn and landscape irrigation headers, and branch takeoffs feeding individual sprinkler zones. The Slip x Slip x Slip configuration means all three ports accept solvent cement, making it compatible with standard 1-1/4-inch PVC pipe cut to length on the job. The white finish is standard for Schedule 40 pressure fittings in above-ground and buried irrigation applications.

Key Features

• Slip x Slip x Slip connection on all three ports for full solvent-weld assembly
• 1-1/4 inch nominal size for standard irrigation trunk and branch lines
• Meets ASTM D 2466 dimensional and pressure requirements for Schedule 40 PVC fittings
• White PVC construction standard for Schedule 40 pressure-rated fittings
• Sold individually; available in case quantity of 25 units

Compatibility

Designed as an OEM-style replacement and standard-use fitting for 1-1/4-inch Schedule 40 PVC piping systems in sprinkler and irrigation applications meeting ASTM D 2466.

Installation Notes

Installation is performed by licensed plumbers or qualified irrigation technicians. Shut off system water supply and relieve line pressure before cutting into an existing run. Clean and dry all pipe ends, apply PVC primer and solvent cement per the cement manufacturer instructions and applicable plumbing or irrigation code requirements, and allow full cure time before pressurizing. Do not use this fitting with threaded pipe ends or on systems requiring CPVC or ABS fittings.