Charlotte Pipe Pvc 02304 1400HA 2 in 90 Deg Street Elbow

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02304 1400HA is a 2 inch PVC 90-degree street elbow with a Slip x Spigot end configuration. It is designed to make a right-angle directional change directly from another fitting without requiring an additional coupling. Manufactured from white PVC, this elbow meets the requirements of ASTM D 2466, the standard specification for PVC plastic pipe fittings. It is sold in a package of 10 and is suited for plumbers, irrigation contractors, and sprinkler system installers working on low-pressure piping layouts.

This street elbow is used primarily in sprinkler and irrigation system piping, where compact fitting-to-fitting connections are needed to navigate directional changes in tight spaces. The spigot end inserts directly into the socket of a standard fitting, eliminating the need for an additional coupler at that joint. It is appropriate for residential and light commercial irrigation installations and above-grade or below-grade PVC pressure piping applications where ASTM D 2466 fittings are specified.

Key Features

• 90-degree street elbow geometry allows direct fitting-to-fitting right-angle turns
• Slip x Spigot end configuration reduces the number of fittings required per connection
• Meets ASTM D 2466 requirements for Schedule 40 PVC plastic pipe fittings
• White PVC construction suitable for standard irrigation and sprinkler system piping
• Sold in a package of 10 units for convenient job-site supply

Compatibility

Designed as an OEM-style replacement or new-installation fitting compatible with 2 inch Schedule 40 PVC piping systems. Suitable for use in sprinkler and irrigation system applications where ASTM D 2466 fittings are required.

Installation Notes

Installation is typically performed by licensed plumbers or irrigation contractors using standard PVC primer and solvent cement per the fitting and cement manufacturer instructions and applicable local plumbing codes. Depressurize and drain the piping system fully before cutting into an existing line. Do not use this fitting on systems exceeding the pressure ratings defined by ASTM D 2466 for the pipe size and application. Solvent-welded joints require adequate cure time before pressurizing the system.