Charlotte Pipe Pvc 02301 3000HA 90 Deg Reducing Elbow 1x3/4

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02301 3000HA is a white PVC 90-degree reducing elbow designed to simultaneously change direction and reduce pipe size within a pressurized system. The fitting connects a 1-inch slip inlet to a 3/4-inch female threaded outlet, making it a two-function fitting that consolidates what would otherwise require separate fittings. Built to meet ASTM D 2466 requirements, this elbow is suited for plumbers, irrigation contractors, and sprinkler system installers working with Schedule 40 PVC piping. The package contains 25 fittings sold as a unit.

This reducing elbow sees regular use in residential and commercial sprinkler and irrigation systems where supply lines must change direction at 90 degrees while stepping down to a smaller distribution line. The slip inlet solves for solvent-welded mainline connections, while the female threaded outlet accommodates threaded risers, heads, or valves. Contractors working on zone headers, lateral runs, and riser assemblies will find this fitting useful wherever a combined turn and reduction is needed in a single component.

Key Features

• 90-degree turn with built-in pipe size reduction from 1 inch to 3/4 inch in a single fitting
• Slip x female thread configuration supports solvent-welded mainline to threaded outlet connections
• White PVC construction compatible with standard Schedule 40 irrigation and sprinkler piping
• Meets ASTM D 2466 requirements for PVC pressure-rated fittings
• Sold in a package quantity of 25 for contractor and job-site use

Compatibility

Designed as an OEM-style replacement and standard-use fitting for 1-inch to 3/4-inch Schedule 40 PVC piping used in sprinkler and irrigation system installations conforming to ASTM D 2466.

Installation Notes

Installation is typically performed by licensed plumbers or irrigation contractors following applicable local codes and ASTM guidelines. Depressurize and drain the system fully before cutting into an existing line. Use a compatible PVC solvent cement on the slip side and apply appropriate thread sealant on the female threaded outlet before making connections. Avoid over-tightening threaded connections, which can crack the fitting body.