Charlotte Pipe Pvc 02300 4000HA 90 Degree Elbow Reducer

Product Description

The Charlotte Pipe PVC 02300 4000HA is a white PVC 90-degree elbow reducer designed to change direction in a pressurized pipe run while simultaneously reducing pipe size. Sized at 1 inch by 1/2 inch with slip connections on both ends, this fitting accepts solvent-welded joints for a secure, leak-resistant connection. It meets ASTM D 2466 standards for PVC pressure fittings, making it appropriate for use in residential and commercial sprinkler and irrigation systems. Plumbers and irrigation contractors install this fitting wherever a 90-degree turn and a size reduction are required in a single component.

This elbow reducer is used in sprinkler and irrigation piping systems where a line must change direction and step down from 1 inch to 1/2 inch pipe in the same fitting. Its slip-by-slip socket ends accept standard Schedule 40 PVC pipe and are joined using PVC primer and solvent cement. The fitting is suited for residential lawn irrigation layouts, commercial landscape irrigation, and similar low-to-moderate pressure water distribution applications. It is sold in packages of 50 units.

Key Features

• 90-degree turn and pipe reduction combined in a single fitting, eliminating a separate coupling
• Slip x Slip socket ends for solvent-cement installation
• Meets ASTM D 2466 requirements for PVC Schedule 40 pressure fittings
• White PVC construction for corrosion resistance in irrigation environments
• Sold in a package of 50 for contractor and job-lot purchasing

Compatibility

Designed as an OEM-style replacement and standard-fit component for 1-inch by 1/2-inch Schedule 40 PVC piping systems used in sprinkler and irrigation applications conforming to ASTM D 2466.

Installation Notes

This fitting is typically installed by licensed plumbers or irrigation contractors following local plumbing codes and manufacturer solvent-cement instructions. Before installation, shut off the water supply and depressurize the line. Clean and deburr pipe ends, apply PVC primer, then solvent cement to both the pipe and socket before joining. Allow full cure time before pressurizing the system.