Charlotte Pipe Pvc 02112 2600HA Pvc Reducer Bushing 1-1/4x1

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02112 2600HA is a white PVC reducer bushing designed to step down pipe size from 1-1/4 inches to 1 inch within a piping system. It connects via a male-threaded spigot end on one side and a female-threaded socket on the other, allowing direct in-line size reduction without additional fittings. Manufactured to meet ASTM D 2466 standards, this bushing is suited for cold-water plumbing, sprinkler, and irrigation applications. Plumbers and irrigation technicians are the primary installers. The unit ships in packages of 25, making it practical for contractors stocking common fittings on the job.

This reducer bushing is used in residential and commercial sprinkler and irrigation systems where a transition from 1-1/4-inch to 1-inch pipe is required. Its white PVC construction is compatible with standard Schedule 40 PVC solvent-weld and threaded piping configurations. It is well suited for lateral line transitions, zone manifold assemblies, and other low-pressure distribution piping where a compact, threaded bushing is preferred over a full coupling reducer.

Key Features

• Steps down pipe diameter from 1-1/4 inches to 1 inch in a single fitting
• Male thread x female thread configuration for direct threaded installation
• Meets ASTM D 2466 requirements for Schedule 40 PVC pressure fittings
• White PVC construction resists corrosion and common irrigation chemicals
• Sold in a package quantity of 25 units for contractor-level stocking

Compatibility

Designed as an OEM-style replacement and standard fitting for 1-1/4-inch to 1-inch threaded PVC piping systems, including sprinkler and irrigation distribution lines conforming to ASTM D 2466 Schedule 40 standards.

Installation Notes

Installation is typically performed by licensed plumbers or irrigation technicians. Shut off system water supply and relieve line pressure before beginning work. Use appropriate thread sealant or PTFE tape on male threads and tighten to hand-tight plus no more than 1 to 2 turns with a strap wrench — do not overtighten PVC threaded fittings, as this can crack the fitting body. Local plumbing codes and applicable standards such as IPC should be consulted before installation.