Charlotte Pipe Pvc 02110 0700HA Pvc Reducing Male Adapter

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02110 0700HA is a white PVC reducing male adapter designed to transition from a 1-inch slip socket to a 3/4-inch male threaded end in a single fitting. It allows a technician to step down pipe diameter while simultaneously converting to a threaded connection, eliminating the need for a separate bushing and threaded fitting. Manufactured to meet ASTM D 2466 standards, this fitting is suited for low-pressure water distribution applications including sprinkler and irrigation systems. Licensed plumbers and irrigation contractors are the primary installers of this component.

This reducing male adapter is commonly used in residential and light commercial sprinkler and irrigation piping systems where a 1-inch PVC main line must transition to a 3/4-inch threaded port or valve connection. The slip inlet accepts standard 1-inch PVC pipe with solvent cement, while the 3/4-inch male NPT thread connects directly to valves, risers, or female-threaded fittings. It ships in packages of 25 units, making it practical for contractors stocking field inventory for multi-zone irrigation installs.

Key Features

• Reduces 1-inch slip socket to 3/4-inch male NPT thread in one fitting
• White PVC construction suitable for irrigation and sprinkler applications
• Meets ASTM D 2466 dimensional and material standards
• Slip x male thread configuration accepts solvent-cement joint on inlet side
• Packaged in quantities of 25 for contractor-level purchasing

Compatibility

Designed as an OEM-style PVC fitting for use in standard Schedule 40 PVC sprinkler and irrigation piping systems requiring a 1-inch slip to 3/4-inch male NPT reducing connection.

Installation Notes

Installation should be performed by a licensed plumber or qualified irrigation contractor in accordance with applicable local plumbing codes. Shut off the water supply and relieve system pressure completely before cutting into an existing line. Use a primer and solvent cement rated for PVC Schedule 40 on the slip end, and allow adequate cure time before pressurizing. Apply thread sealant tape or paste to the male NPT threads before making the threaded connection; do not overtighten, as PVC threads can crack under excessive torque.