Charlotte Pipe Pvc 02110 0600HA 1/2x3/4 Reducing Male Adapter

Product Description

The Charlotte Pipe Foundry PVC 02110 0600HA is a white PVC reducing male adapter designed to step down pipe size while delivering a threaded male end for system connections. It accepts a 1/2-inch slip socket on one end and transitions to a 3/4-inch male thread on the other, allowing installers to reduce line size and connect to threaded fittings in a single fitting. Manufactured to meet ASTM D 2466 requirements, this adapter is suited for low-pressure irrigation and sprinkler piping. Plumbers and irrigation contractors install it as a standard transition component in Schedule 40 PVC piping assemblies.

This reducing male adapter is used primarily in residential and light commercial sprinkler and irrigation systems where a pipe run must be reduced in diameter before connecting to a threaded valve, riser, or manifold port. The slip inlet allows solvent-welded attachment to 1/2-inch PVC pipe, while the 3/4-inch male thread mates with female-threaded fittings downstream. Sold in a package quantity of 25 units, this fitting is practical for contractors stocking common transition sizes for irrigation layout work.

Key Features

• Reduces from 3/4-inch male thread to 1/2-inch slip socket in a single fitting
• Slip x male thread configuration simplifies transitions to threaded components
• Meets ASTM D 2466 requirements for PVC pressure fittings
• White PVC construction suited for irrigation and sprinkler applications
• Sold in 25-unit packages for contractor-quantity stocking

Compatibility

Designed as an OEM-style replacement and standard-fit component for Schedule 40 PVC piping systems used in sprinkler and irrigation assemblies requiring a 1/2-inch slip inlet and 3/4-inch male threaded outlet.

Installation Notes

Irrigation contractors and plumbers install this fitting using standard PVC solvent cement on the slip end per manufacturer and local plumbing code requirements. Turn off system pressure and drain the line before cutting into an existing run. Apply primer and solvent cement to both the pipe end and the slip socket, then seat firmly and allow full cure time before pressurizing. Hand-tighten the male thread connection with thread sealant tape; avoid over-torquing threaded joints on PVC fittings.