Charlotte Pipe Pvc 02108 2600HA 2x3/4 Reducer Bushing

Product Description

The Charlotte Pipe Foundry PVC 02108 2600HA is a white PVC reducer bushing designed to step down pipe size from 2 inches to 3/4 inches. It features a spigot inlet and female-threaded outlet, allowing it to connect directly into a socket fitting on one end while accepting a male-threaded pipe or fitting on the other. This bushing is manufactured to meet ASTM D 2466 standards, confirming it meets recognized dimensional and pressure requirements for Schedule 40 PVC fittings. It is a common component in irrigation and sprinkler system piping, installed by plumbers, irrigation contractors, and experienced service technicians.

This reducer bushing is used in residential and light commercial sprinkler and irrigation systems where a main line or branch line must be reduced to a smaller threaded outlet. The spigot-by-female-thread configuration makes it straightforward to insert into an existing socket tee, elbow, or coupling while threading a smaller-diameter riser, valve, or lateral line directly into the bushing. It is sold in a package quantity of 10, making it practical for multi-zone irrigation jobs or service stock.

Key Features

• Reduces from 2 inches (spigot) to 3/4 inches (female thread) in a single fitting
• Spigot x female-thread end configuration for versatile connection into socket fittings
• Meets ASTM D 2466 requirements for Schedule 40 PVC pressure fittings
• White PVC construction suitable for irrigation and sprinkler piping
• Sold in a package of 10 units for job-lot or stock purchasing

Compatibility

Designed as an OEM-style Schedule 40 PVC fitting for use in sprinkler and irrigation systems requiring a 2-inch to 3/4-inch pipe size reduction with a spigot-to-female-thread connection.

Installation Notes

Installation should be performed by a licensed plumber or qualified irrigation contractor in accordance with applicable local plumbing and irrigation codes. Shut off system water supply and depressurize the line before making any fitting connections. Apply PVC primer and solvent cement to the spigot end per manufacturer instructions; use appropriate thread sealant tape or compound on the female-threaded end before assembling threaded connections. Do not over-torque threaded connections, as PVC threads can crack under excessive force.