Charlotte Pipe Pvc 02108 2000HA Pvc Sch 40 Reducing Bushing

Product Description

The CHARLOTTE PIPE PVC 02108 2000HA is a Schedule 40 PVC reducing bushing designed for cold water pressure piping systems. It features a spigot (SPG) end that solvent-welds directly into the hub of a mating fitting, and a female iron pipe thread (FIPT) end on the opposite side. The bushing reduces from 1-1/2 inch to 1-1/4 inch and is suitable for potable cold water supply, irrigation, and general low-pressure plumbing applications. Licensed plumbers and pipefitters install this fitting where a threaded female connection must transition to a solvent-weld hub in a PVC distribution system.

This bushing is used in residential and light commercial cold water pressure piping. Typical applications include domestic water supply lines, irrigation manifolds, and pump discharge assemblies where a size reduction from 1-1/2 inch to 1-1/4 inch is needed. The spigot end inserts into a standard Schedule 40 socket hub, while the female-threaded end accepts a 1-1/4 inch male-threaded fitting or adapter. It is sold individually and is well suited for service and repair work as well as new construction.

Key Features

• Spigot end solvent-welds into a standard Schedule 40 PVC hub fitting
• Female iron pipe thread (FIPT) end accepts 1-1/4 inch male-threaded connections
• Reduces from 1-1/2 inch to 1-1/4 inch in a single compact fitting
• Rated for Schedule 40 cold water pressure service
• Lightweight PVC construction at approximately 0.05 pounds per unit

Compatibility

Designed as an OEM-style replacement and standard fitting for Schedule 40 PVC cold water pressure piping systems using solvent-weld and threaded connections.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable IPC or local plumbing code requirements. Shut off the water supply and relieve system pressure before beginning work. Clean and dry all solvent-weld surfaces, apply the appropriate PVC primer and cement to both the spigot end and the receiving hub, and allow adequate cure time before restoring pressure. Use thread sealant tape or compound on the female threads when making up the threaded connection.