Charlotte Pipe Pvc 02108 0900HA 1-1/4x1/2 Reducer Bushing

Product Description

The Charlotte Pipe Foundry Co. PVC 02108 0900HA is a white PVC reducer bushing designed to reduce pipe size from 1-1/4 inches to 1/2 inches. It features a spigot on the inlet end and a female thread on the outlet end, allowing it to transition between slip and threaded connections in a single fitting. The bushing is manufactured to meet ASTM D 2466 requirements, confirming it meets dimensional and pressure-rating standards for Schedule 40 PVC pressure fittings. Licensed plumbers and irrigation technicians are the typical installers for this type of fitting.

This reducer bushing is used in residential and light commercial sprinkler and irrigation systems where a larger supply line must be stepped down to a smaller threaded outlet. The spigot end inserts into a standard socket fitting or valve body, while the female thread accepts a 1/2-inch male-threaded component such as a riser, nozzle adapter, or valve. It is also suitable for general PVC plumbing applications requiring a size reduction with a threaded terminal connection. Sold in packages of 25 units, making it appropriate for contractors stocking field inventory.

Key Features

• Reduces from 1-1/4 inches spigot inlet to 1/2 inches female thread outlet in a single fitting
• Meets ASTM D 2466 dimensional and pressure requirements for Schedule 40 PVC fittings
• White PVC construction compatible with standard solvent-weld and threaded PVC systems
• Spigot x female thread configuration bridges slip and threaded connection types
• Packaged in quantities of 25 for contractor and field use

Compatibility

Designed as an OEM-style replacement and standard component for Schedule 40 PVC sprinkler, irrigation, and general plumbing piping systems requiring a 1-1/4 inches to 1/2 inches reduction with a female threaded outlet.

Installation Notes

This fitting is installed by a licensed plumber or irrigation technician. Shut off the water supply and relieve system pressure before making any connections. The spigot end is joined using PVC primer and solvent cement per the fitting manufacturer instructions and applicable plumbing code requirements. Apply thread sealant tape or compound to the male-threaded component before engaging the female thread end; do not over-tighten threaded connections, as PVC threads can crack under excessive torque.