Charlotte Pipe Pvc 02108 0600HA Pvc Reducer Bushing 3/4x1/2 Spigot X

Product Description

The CHARLOTTE PIPE FOUNDRY CO. PVC 02108 0600HA is a white PVC reducer bushing designed to reduce pipe size from 3/4 inch to 1/2 inch within a pressurized line. The spigot-by-thread connection style allows the bushing to seat into a socket fitting on one end while threading onto a male-threaded fitting on the other, giving installers a straightforward transition in mixed-connection piping runs. Manufactured to meet ASTM D 2466 standards, this bushing is built for reliable service in low-pressure distribution systems. It is a common stock item for plumbers and irrigation contractors working on residential and light commercial jobs.

This reducer bushing is well suited for sprinkler and irrigation system piping where a size reduction is needed between supply lines and smaller lateral or distribution lines. The white PVC construction holds up to typical outdoor irrigation conditions and is compatible with standard PVC solvent-weld and threaded fittings used throughout residential and commercial irrigation layouts. It ships in packages of 25, making it practical for contractors stocking up for multiple installations or service calls.

Key Features

• Reduces pipe size from 3/4 inch to 1/2 inch in a single fitting
• Spigot x thread connection for use with socket and male-threaded fittings
• Meets ASTM D 2466 standard for PVC pressure fittings
• White PVC construction suited for irrigation and sprinkler applications
• Packaged in quantities of 25 for contractor convenience

Compatibility

Designed as an OEM-style replacement and standard component for PVC sprinkler and irrigation piping systems using 3/4 inch to 1/2 inch size reductions with spigot and threaded connections.

Installation Notes

Installation is typically performed by licensed plumbers or irrigation contractors following applicable local codes. Shut off system water supply and relieve line pressure before making any fitting connections. Use appropriate PVC primer and solvent cement on the spigot end per manufacturer and code requirements, and apply thread sealant tape or compound on the threaded end to ensure a leak-free joint. Do not overtighten threaded connections on PVC, as this can crack the fitting.