Charlotte Pipe Pvc 02107 0950HA Pvc Reducer Bushing

Product Description

The Charlotte Pipe PVC 02107 0950HA is a white PVC reducer bushing designed to reduce pipe size within a pressurized piping run. The spigot-by-slip end configuration allows the male spigot end to insert into a female socket fitting while the slip end accepts the smaller pipe directly. This bushing transitions from 1-1/4 inches down to 3/4 inches and meets ASTM D 2466 requirements for Schedule 40 PVC pressure fittings. It is a standard component installed by plumbers and irrigation technicians working on residential and light commercial PVC piping systems.

This reducer bushing is suited for use in sprinkler and irrigation systems where pipe size reductions are needed at branch points or zone transitions. It is also used in general PVC drain, waste, and vent or pressure piping applications where a 1-1/4-inch line must transition to a 3/4-inch line. The spigot x slip connection style is a common configuration for in-line reductions within PVC fitting assemblies. Sold in packages of 25 units, making it practical for contractors stocking multiple fittings per job.

Key Features

• Reduces from 1-1/4 inches to 3/4 inches in a single fitting
• Spigot x Slip end configuration for in-line installation within socket fittings
• Meets ASTM D 2466 requirements for Schedule 40 PVC pressure fittings
• White PVC construction for UV-stable, corrosion-resistant service
• Packaged in quantities of 25 for contractor use

Compatibility

Designed as an OEM-style Schedule 40 PVC fitting compatible with standard 1-1/4-inch spigot and 3/4-inch slip PVC fitting assemblies used in sprinkler and irrigation piping systems meeting ASTM D 2466.

Installation Notes

Installation is performed by licensed plumbers or irrigation technicians. Depressurize and drain the system completely before cutting into an existing line. Use PVC primer and solvent cement rated for Schedule 40 PVC fittings in accordance with ASTM D 2564; follow cure times before restoring pressure. Do not apply heat or use threaded connections on the slip or spigot ends.